Lombardini Generator LMG 6000

ENGINE: The LMG 4000/6000 are equipped with the Lombardini 15 LD, single-cylinder, four-stroke diesel engine, known for its compactness and lightness thanks to the crank case and cylinder head in aluminium and the air cooling system.

ALTERNATOR: On models LMG 4000/6000 the alternator is a syncronous type without brushes with the windings on the stator. The wave shape allows the safe utilization of the most sophisticated electronic equipment and a good input to the battery charger.

COOLING: A characteristic of the LMG 4000/6000 generator set is the air-water cooling system with radiator. The sea water cools the oil as well as the external walls of the alternator’s stator and the inlet air.

REMOTE CONTROL BOX: The generator set is supplied with a remote control box and 10 m of plug-in cable. An automatic shutdown operates in case of oil pressure and water temperature failure, warning lights indicate high water temperature, low oil pressure. A display indicates output voltage, output current, engine battery low voltage and runtime hours. On request an additional control box is also available.

MAINTENANCE: To facilitate maintenance, the generator has been designed to allow the main controls on engine parts, the periodic replacement of consumable components and the filling of liquids only from a side.

SILENT ENERGY: The cowling is made of fiberglass, with neoprene coating and honeycomb in order to substantially reduce the noise.

EASY INSTALLATION: The unit is supplied with externally mounted anti-vibration mounts, it is already fitted with a hole on the bonnet for the passage of the drain hose and connections for the electrical wiring and the water pump hoses.

AUTOMATIC SAFETY STOP: In order to avoid serious and irreparable damage to the engine, a special device will intervene to stop the engine in case of overload, high temperature of cooling water or low oil pressure.

HEELING: In special weather conditions or when the boat is to sail, it is necessary for the generator to continue to operate on a regular basis to ensure the energy required for the electronic tools and board accessories. The unit can work with lateral or longitudinal inclinations of 25° and intermittently up to 30°.